Professional 100%-effective flush for the engine's oil system

Unmatched decarbonization of the oil system and piston rings

• A treatment for the effective and safe removal of carbon deposits from the piston rings and oil system
• Designed for application into the oil before an oil change, on all internal combustion engines
• Maximum protection for direct-injection engines – GDi, TSi, FSi… and for DPF/GPF particulate filters
• Completely safe for all engine components
• 100% effective, with immediate results
• Very simple application, 325 ml package
• Also available as part of a BG Products decarbonization kit

Benefits

• Fully restores the performance of the oil system
• Removes even the most stubborn carbon deposits from the piston ring area
• Restores the engine's original compression pressures
• Reduces oil consumption
• Reduces the level of harmful emissions
• Reduces the amount of deposits building up in the particulate filter
• The new oil goes into a clean system, without risk of contamination or degradation
• Extends engine life

How to use

• Before an oil change, add one package (amount depending on oil volume – see dosage below) to the old oil.
• Start the engine and let it run at elevated revs (approx. 1200 rpm) for 10–20 minutes.
• Do not drive the vehicle – the treatment is applied at elevated revs with the vehicle stationary.
• Immediately after application, drain the oil and replace the oil filter.
• There is no need to flush the system before adding the new oil.
• With the new oil, we recommend also applying BG 115 or BG 112, depending on the engine type.

Dosage

• 325 ml package per 4–6 l of engine oil