EGR blanking plate - Euro3 D5 - D5244T/D5244T2
2019-11-04

If you load EGR OFF software into Euro3 engine (D5244T (120kW) or D5244T2 (96kW)) with VDASH, you must install EGR blanking plate according the pictures below: You can buy the blanking plate in our e-shop.    

VEA unlock - tune - DENSO
2020-07-05

How to unlock Volvo VEA ECM with VDASH? Follow this tutorial! If you dont have UCBP and you want to tune your car, you can build your own UCBP - HERE  or just buy ours from our e-shop - HERE       Supported HW numbers: …

Bluetooth modul BT PHONE P3GSM - Installation guide
2021-09-03

Installation Guide For the Bluetooth module BT PHONE P3GSMand audio extensions   Note: Please read the whole Guide first before you start with the replacement. Caution: The Bluetooth module is an ESD sensitive board. Be careful after…

XC90 LED Tail lights upgrade - MY2006+
2020-06-15

This is a quick tutorial on how to upgrade rear/tail lights for Volvo XC90s to LED lights, so you can go from this: to this: You will need: - LED lamps :)- your car must be MY2006 and above- the latest REM software- CEM configuration with VDASH: …

VDD Application
2020-09-04

Vdash Dongle application Application for remote controling Volvo cars. Service monitoring, remote controled additional functions (like starting fuel heater, air condition, ..). Remote assistance in case there's something wrong with the car or…

P2 MY 1998 - 2004 VDD - úprava CEM pro podporu commandu na vozech P2 MY2000 - MY 2003
2021-04-19

VDD bridge CEM relays To be able to turn on the independent heater, lock, unlock etc.... for Volvo P2 MY 1998 - 2004, you need to bridge the relay in the CEM which disconnects the OBD socket when the key is removed from the ignition.

VOLVO platforms
2018-12-30

Volvo Platforms P80 – classic This is for the S70, V70, C70 models. Usually, their year of production ranges from 1997 to 2004. These models are easily identified by the dashboard, which looks like the following photo: P1 – Platform 1 This is…

Configuration changes - P3 cars
2020-07-11

For change configuration in P3 you need to decode CEM PIN via OBD with VDASH - how to do it is described here: https://d5t5.com/article/volvo-cem-pin-code This is applicable only for P3 cars: V40II / V40CC / S60II / S60CC / V60 / V60CC / XC60 /…

Volvo abbreviations - zkratky
2022-11-17

Volvo abbreviations ABS Anti-lock Brake System modulate ABL Active Bending Light AC Alternating Current A/C Air Conditioning ACC Adaptive Cruise Control ACCM Air Conditioning Control Module ACM Alternator Control Module ADM Additive Dosing Module…

Boost pressure sensor clogged - diesel VEA and latest D5 5-cyl.
2020-01-17

If you have diesel car with 5-cylinder engine from 2012 or newer, or you have 4-cylinder VEA engine, then you need to clean the boost pressure sensor every 30-80.000-km. Otherwise your engine power will rapidly decrease and you can expect the engine…

TFT retrofit
2019-05-23

TFT DIM Retrofit - A platform for series P3 (S/V60, XC60, S80II, XC/V70III) All older platforms - P3 are all equipped with the older version of the instrumental board. (DIM)  or These vehicles can be modernized and equipped with much more modern…

VDASH support for iCUP / Android Volvo cars - diagnostics
2023-09-18

VDASH support for iCUP / Android Volvo cars - diagnostics The new generation of Volvo cars with the Android system (iCUP) comes equipped with state-of-the-art security features and an integrated firewall. This firewall is housed within a cutting…

Sensus connect - Navigation activation with VDASH
2020-01-17

If there's Sensus connect installed in your vehicle and you are able to see this message once having pushed the NAV button or it simply appears in VDASH, it means that your vehicle has a navigation map for certain regions or countries in places…

Sensus - Navigation conversion US>EU MY2012-2014 (old sensus without globe key)
2020-06-23

If you want to convert your first generation Volvo Sensus (MY2012-2014 - without the globe key) navigation from USA market to Europe, then you need to load special conversion software via USB.Unfortunatelly, this service is not possible for now via…

VDD Dongle
2018-11-26

VDD - VDASH DONGLE – remote diagnostics, function extender, etc... UPDATE: VDD officialy available NOW in our e-shop! VDD - Volvo function extender To find out what is supported in your car, enter the VIN and press Enter: VDASH Dongle (VDD) is…

Engine Remote Start - ERS
2020-05-05

Certain P3 Volvo cars are able to start engine from car key (both 5-button and 6-button) after change of the cars configuration. The cars and tutorial, how to start the engine is described below. Cars: - the car must have an automatic transmission-…

Pairing SCU / SCL unit
2023-10-05

Preconditions IMMO code must present - for P3 cars it is automatically decoded when CEM PIN is present or successfully decoded. The SCU / SCL unit must be new virgin (blue box), used SCU / SCL from another car can't be used. Procedure Ignition…

VDD Dongle - Fuel Heater doesn’t start when command “Heater Start” sent
2021-02-03

VDD Dongle - additional heater will not turn on after “Turn additional heater on” has been clicked on in the D5T5 VDD mobile app      - Check all Diagnostic Trouble Codes (DTCs) related to additional heater on the Service page in the VDD…

Bluetooth P2V2 - Installation guide
2019-10-17

How to install the Bluetooth module BT Volvo P2V2 Note: Before you begin, make sure you have read the manual beforehand. Warning: The Bluetooth module is a plate highly sensitive to electromagnetic fields. Therefore you must be careful…

VDASH PRICELIST - CENÍK
2020-07-09

Description of Volvo platforms: https://d5t5.com/article/volvo-platforms How to unlock the VEA engine control unit (ECM): https://d5t5.com/wiki/wiki/article-how-unlock-and-tune-vea-with-vdash-ucbp

Bluetooth P2V2 - User guide
2019-10-17

User Guide For Bluetooth module BT Volvo P2v2    1.        Introduction Because the update is based on the original Phone Module (PHM) all the control of this updated module is same as an original one. So it’s recommended to be familiar with the…

Volvo DiCE - update
2019-09-30

EN DiCE update VDASH works best with the latest Windows driver and the latest DiCE firmware. Both available for download: https://d5t5.com/sw/SetupDiCE.exe  Update the DiCE firmware DiCE with SN 2xx.xxx to version 5.6.2 from: c:\Program Files\DiCE…

Vdash release notes
2023-05-16

Vdash release notes

Známé chyby po nahrání optimalizace výkonu
2022-06-13

After performing engine optimization, the following errors are 95% likely to occur, which are only visible after loading any diagnostics. These are engine unit software checksum - ECM. The original checksum of the engine unit is stored in the…

Bluetooth modul BT PHONE P3GSM - User Guide
2021-09-02

User Guide Bluetooth modul BT PHONE P3GSMa volitelné rozšíření pro poslech hudby  1.        Introduction Because the update is based on the original Phone Module (PHM) all the control of this updated module is the same as the original one. So it’s…

Volvo diesel injectors codes and engine variants
2024-03-15

Injector part numbers according the Volvo platform and engine code Volvo platforms recognition is here: VOLVO platforms Some of those injectors requires coding the IMA codes or the injector class. Both can be done with VDASH or VIDA. P3 only …

Official Volvo links
2019-10-08

Here are some usefull official Volvo links:   Volvo map updates for SPA/CMA cars: https://www.volvocars.com/uk/support/downloads/maps/spa Volvo map updates for P3 - Sensus Connect (with globe key):https://www.volvocars.com/uk/support…

How to appear on the MAP as a D5T5 dealer?
2020-06-22

If you wish to be visible as a dealer on the D5T5 map, all that it requires is you simply going to VDASH and change the settings to dealer. https://d5t5.com/dealers/ The map is updated once every 24 hours.

The CANALT wiring for VDD - SPA / CMA vehicle support
2021-11-15

The VDD Dongle CANALT wiring for SPA CMA cars The VDD dongle needs access to low speed CAN bus to enable to see status of locks, doors and windows, as well as to support Parking heater or Remote Engine start commands.  To provide access to low speed…

Big brakes upgrade for S/V60
2021-06-27

Rebuild kit for the front brakes in Volvo S/V60s with the original diameter 300-mm. Parts used from V60 D6 with a diameter 336-mm. Part numbers needed for complete rebuild: 2 pcs belt holder: 8603758  Brake calliper PP: 36000375 Brake calliper LP:…